Is anyone running a BCF200 in windows 7 x64?

If you are, how did you set it up? I tried following the guides on the forum, but none seemed to work or apply to a 64 bit OS Thanks!

Working fine in win 7 x64 here. Have a look on the behringer website for the bc controllers, they have some win7x64 specific drivers there. You need them :) Or just click this....

doesn't work... 

I understand you have a problem with your BCF 2000 and Win 7 x64. So do I. I tried several times to install the mentioned driver on a Sony VAIO with two processors, and it has never reached the end of the install procedure. Of course, the 32 bit driver doesn't install on my computer. So when I try to use it as a USB midi controller, it simply does not show in my parameters. As for now, I run it as a standard midi controller through a M4U XL 4x4midi interface that is recognized by my stuff, but this is not very good, as I have to set parameters by hand directly on the BCF 2000.

I did have a problem with the bcr2000 which boiled down to my lack of understanding how windows works. Here's how I solved it. You need to activate the administrator account and login that way. Find and install the 64bit driver. Log back in under your own account. You may have administrator priviledges under your own account, but I found out they aren't good enough. This should be the same for the bcf. Hope it works soon. Steve

Had some trouble with my bcf under win7 x64 with reaper. Turns out the driver was messing stuff up, uninstalled it, then let windows install the generic driver and now all is good again!

Indeed, use latest driver under admin rights should work :) But.. has anyone else found that occasionally the bcf MIDI in and out slightly renames itself and you have to reassign it in reaper? This could be because I have two units but very annoying! ;)